Change Unit Of Measure For Temperature Reading - Perry 1TPTE011B Manual Del Usuario

11 - CONFIGURATION MENU (installer)

11. - CHANGE UNIT OF MEASURE FOR TEMPERATURE READING

3
The thermostat is pre-set in the factory to display temperatures in degrees
Centigrade (Celsius), it is possible to switch to the Fahrenheit scale or vice
versa with the following procedure:
EN From normal thermostat operation, access the menus by pressing for 5 secs.
the « Mode » key.
•Through the path -> Set PROG
•Select the desired unit of measure with the
OK
then press to confirm.
All temperature set points will be updated according to the new scale.
•Press the Mode key twice to exit.
40
OK
-> select Set UNIT , then press
keys: °C or °F,
.
OK
OK
/OK
or