Hughes & Kettner TubeMeister 5 Manual Del Usuario página 9

Things to do before powering up the amp
• Prior to putting this device into operation, please
carefully read this manual, including the safety
instructions.
• The manufacturer is not liable for any damages to
this device or any other devices that may arise due to
improper use.
• Make sure that the POWER switch is OFF (pointing
downward), and that the rated voltage on the back
of the device matches your local AC mains voltage,
before connecting the TUBEMEISTER 5 to the
power supply.
• For HEAD only: Please remember: total impedance
of the connected speaker cabs must be 8Ω or higher!
(See Section 1.2 SPEAKER)
• Just a reminder before using the TUBEMEISTER 5:
It is LOUD! High volume levels may cause damage
to your ears.
Content
1 Connections and Controls
2 Standard Setup/Wiring
3 Specifications
9
10
12
13