Troubleshooting - Silverline 264153 Instrucciones Originales

GB

Troubleshooting

Problem
No function when ON/OFF Slider
Switch (5) is operated
Cutting disk is OFF centre/
vibrating eccentrically
10
Possible cause
No power
Defective ON/OFF Slider Switch
Grinding/cutting disc is overly worn
Deformed grinding/cutting disk
Grinding/cutting disc not fitted correctly
Solution
Check power supply
Replace the ON/OFF Slider Switch at an authorised Silverline service
centre
Turn OFF the grinder, remove and replace the disc, as instructed in
'Fitting a grinding or cutting disc'
Turn OFF the grinder, remove and replace the disc, as instructed in
'Fitting a grinding or cutting disc'
Turn OFF the grinder, remove and replace the disc, as instructed in
'Fitting a grinding or cutting disc'