Operating The Appliance - Amibot Spirit ICE Manual De Usuario

EN

Operating the appliance

Charging
Assembling the home base
Plug in the home base using the power cable.
Place it on a level surface next to a wall, perpendicular to the floor.
Keep a distance of at least 2 m in front of the base and 1 m at either
side.
NOTE: When the AMIBOT robot is on its home base, make sure that it is
switched on and the home base power light is on.
10
Operating the appliance
Switching the robot on
Turn the power switch to ON. "I" is ON and "O" is OFF. The robot is
ready to be charged.
Charging the robot
Figure 1
There are two ways to charge the battery:
• Using the home base (Figure 1).
• Using the power adapter (Figure 2).
EN
Figure 2
11