Cleaning The Filters - Winix AM90 Manual De Instrucciones

FILTER CARE

6. Cleaning the filters

Intervals between filter cleaning may vary depending on the air quality.
①·
Use a vacuum cleaner or soft brush to clean
the Pre-filter. If it is excessively soiled, rinse
in room temperature water.
• Do not use detergent or soap.
• Allow the filter to dry for 24 hours or
more before using.
※ If the pre-filter becomes damaged or in any way needs replacement:
Please contact Winix
(877)-699-4649
www.winixamerica.com
·
NOTICE
English
• Do not use benzene, alcohol, or other volatile fluids, which
may cause damage or discoloration.
• The Pre-filter is reusable after cleaning, ensuring it is
completely dry.
• Do not use hot water over 104
paint thinner.
• After washing the filter, allow it to dry completely in a well
ventilated area. Otherwise, it may develop a bad odor.
o
F or volatile fluids such as
16
AM90