Initial Operation - Winix AM90 Manual De Instrucciones

INITIAL OPERATION

①·
Insert the power cord into an electrical
outlet.
②·
Press the 'Power' button.
·
NOTE
③·
By default, when the unit first powers on, the
mode will be set to Auto with PlasmaWave
enabled.
• When in Auto mode, the fan speed will
be automatically adjusted according to
the environments air quality.
• PlasmaWave® works to remove harmful
airborne contaminants.
·
NOTE
English
•
During the first 4 minutes of power up, the Air Quality
Indicator will flash as the Smart Sensors measure the air
quality in the environment, after which normal operation will
begin.
• In Auto mode, as the indoor air quality improves, the fan
speed will automatically be reduced to Low.
• When the unit is running, you may hear a chirping or buzzing
sound. The sound is from large particles passing through
PlasmaWave®, it is normal and does not signify product
failure. To disable PlasmaWave®, see page 12.
®
9
AM90