brondell CORAL UC300 El Manual Del Propietario página 14

PRODUCT INSTALLATION (cont.)
STEP 3: FILTER HEAD CONNECTION ASSEMBLY INSTALLATION
1. Attach the two Quick Connect 90° Elbows to back side of the Connection Assembly Inlet and
Outlet as shown
Be sure to install the Filter Head Connection Assembly so that the top of the assembly is
at least 14 inches from the floor of the sink cabinet. Otherwise the filters will not install
or seat correctly.
2. Using a pencil, mark where the Filter Head Connection Assembly will be mounted to the sidewall
of the cabinet (at least 14" from the cabinet floor). Use a level to make sure that the Assembly will
be mounted straight.
NOTE: Before you mount the Connection Assembly, it may be a good idea to practice inserting
and removing the filters.
3. Insert the two mounting screws through the holes in the Assembly frame and screw into the
cabinet sidewall.
12
UC300
UC300
UC100
UC100