Menu item
Filter Auto Clean
Maintenance Information
Confi guration
Draft Prevention
(Only available with
Occ. sensor installed
indoor unit model)
Contrast Adjustment
Display
Current Settings
Clock &
Date & time
Calendar
12H/24H Clock
Daylight Saving Time
Language
Note: Available setting items vary with the indoor unit model.
Sub Remote Controller Menu Items
If two remote controllers are connected to a single indoor
unit, the following menu items are not set in the sub remote
controller. In this case, the following items should be
confi gured in the main remote controller.
●
Individual Airfl ow Direction
●
Schedule
●
Off timer
English
Set the time when the fi lter needs to be
automatically cleaned. For the detailed
operation refer to the Operation Manual of the
self cleaning decoration panel.
Used to display the maintenance information.
The draft prevention function can be enabled
or disabled.
When enabled, the Occ. sensor will adjust the
louver ' s position to prevent air blowing directly
on occupant.
Used to make LCD contrast adjustment.
Used to set the display mode.
●
Display mode
Standard, Detailed, or Simple display
●
Detailed and Simple displays provide the
selectable display item among Room Temp,
System, None or Outside Air Temp.
●
Used to display a list of current settings for
available items.
Used to confi gure date and time settings
and corrections.
●
The default time display is 12H.
●
The clock will maintain accuracy to within
±30 seconds per month.
●
If there is a power failure for a period not
exceeding 48 hours, the clock will continue
working with the built-in backup power
supply.
The time can be displayed in either a 12 hour
or a 24 hour time format.
Used to adjust the clock in observance of
daylight saving time.
The display language can be selected
between English, Francais, or Espanol.
●
Setback
●
Draft Prevention
Description
Indoor unit
Outdoor unit
controllers in control
Reference page
–
37
38
39
40
42
42
45
45
48
Two remote
21