Electronic Speed Control Setup - Maverick STRADA MSC-30BR-WP Manual De Instrucciones

Electronic Speed Control Setup

MSC-30BL-WP Features:
1. Water-resistant* and dust-proof. The ESC has been designed to
work in wet conditions.
a.*Please remove the cooling fan when using the ESC very wet conditions.
b.*After using the ESC in wet conditions, please clean and dry it to avoid
the oxidation to copper connectors
2. 2-3S Capalable (for 3S you must change the standard 5V
cooling fan to a 12V cooling fan, or supply the 5V cooling fan from
the receiver 5-6V);
3. Compatible with sensorless brushless motor.
4. 2 running modes ("Forward with brake" mode,
"Forward/Backward with brake" mode).
5. Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force
adjustment.
6. 4 Punch modes from "Soft" to "Very aggressive" to be suitable for different chassis, tires and tracks.
7. Multiple protection features: Low voltage cut-off protection for Lipo or NiMH battery / Over-heat protection /
Throttle signal loss protection / Motor blocked protection.
8. Easily programmed with the "SET" button on the ESC or with the LED Program Card.
Model
Continuous Current
Burst Current
Resistance
Application
Motor Limit 2S LiPo /
6 cell NiMh
3S LiPo /
9 cell NiMh
Battery
Built-in BEC
Program Port
Motor Type
Dimension
Weight
MSC-30BL-WP
45A
220A
0.0012 ohm
1/10 scale On-Road and Off-Road
On-Road: ≥ 9T
Off-Road: ≤ 12T
3650 Size Motor
On-Road: ≥ 12T
Off-Road: ≤ 18T
3650 Size Motor
4-9 cells NiMh or 2-3S LiPo
1) For 4-6 cells NiMH or 2S Lipo: You needn't change the 5V cooling fan on the ESC;
2) For 7-9 cells NiMH or 3S Lipo: You must change the original 5Vcooling fan to 12V
cooling fan, or supply the 5V cooling fan from the receiver (5-6V);
6V/2A
Multiplexed with cooling fan port
Sensorless Brushless
48.5*38*32mm
90g
9