Control; Image Adjustments; Brightness; Contrast - NDS Aesculap Manual De Instrucciones

Control

The EndoVue displays are controlled via a 6 button keypad. The keypad, located on the bottom front of the
display, allows the user to make adjustments to various display parameters using the On Screen Menus (OSM)
system.
4

Image Adjustments

Adjust Brightness
Adjust Contrast
Adjust Backlight
3
Press the Brightness / Contrast button to display the Brightness control. Press the
or button to increase or decrease brightness. Setting the brightness too high or too
low will decrease the amount of visible grayscales.
Press the Brightness / Contrast button twice to display the Contrast control. Press the
or button to adjust the contrast. Setting the contrast too high or too low causes
loss of some grayscales. Color saturation may appear incorrect.
Press the Brightness / Contrast button three times to display the Backlight control.
Press the or button to set the backlighting.
Note: Lowering the backlight level will increase the backlight lifetime.