Siemens SITRANS F FCT030 Manual Del Usuario página 11

Signal input Start Dosing
Stop Dosing
Active
Reset Totalizer 1
Reset Totalizer 2
Reset Totalizer 3
Reset All Totalizers
Start Zero Point
Adjustment
Pause/Resume
dosing
Force Output
Freeze Output
Signal input Start Dosing
Stop Dosing
Passive
Reset Totalizer 1
Reset Totalizer 2
Reset Totalizer 3
Reset All Totalizers
Start Zero Point
Adjustment
Pause/Resume
dosing
Force Output
Freeze Output
Relay output Alarm Class
Alarm Item
One Stage Dosing
Two Stage Dosing
Relay output Alarm Class
Alarm Item
One Stage Dosing
Two Stage Dosing
Note
Load
Signal output: < 500 Ω at 14 to 24 VDC (active), 14 to 30 VDC (passive)
Relay output: 30 VAC/VDC, 100 mA
Passive signal input: 15 to 30 VDC, 2 to 15 mA
Connection check-up
1. Check individual wire installation by tugging firmly.
2. Firmly tighten cable glands and insert blanking plugs in unused cable entries.
3. Remove O-ring from lid.
4. Reinstate lid and screw in until mechanical stop. Wind back lid by one turn.
FCT030 transmitter
A5E03650800-AH, 05/2015
X
X
X
Normally open
X
Normally closed
11