Siemens SITRANS F FCT030 Manual Del Usuario página 8

2. Press wiring tool wedge into top slot to spread clamp plates.
3. Insert wire.
4. Release wiring tool.
Power supply
1. Flip open power supply terminal protection cover.
2. Remove cap and ferrule from cable gland and slide onto cable.
3. Push cable through open gland and cable path.
4. Restore ferrule and tighten cap to lightly hold cable in place.
5. Connect ground to terminal
①
L/+
②
N/-
③
AC connection
Power: 100 to 240 VAC +10/-15%, 47 to 63 Hz
8
and power to terminals L/+ and N/- using wiring tool in the manner shown below at right.
DC connection
Power: 20 to 27 VDC +10/-10%
A5E03650800-AH, 05/2015
FCT030 transmitter