Selecting The Wedges - Inmes IM-4P Manual De Intrucciones

c) Now adjust the desired working height;
d) Using a 24mm wrench Fig. 12 and tighten against the base 02 to the nut 03 as
shown in Fig. 12.
The IM-4P Underpinner has two versions as follow:
a) IM-4P Underpinner that uses UNI wedges;
b) IM-4P Underpinner that uses Cartridge wedges.

7.1 - Selecting the wedges

INMES INDUSTRIAL LTDA - GRAMPEADORA IM-4P – UNDERPINNER IM-4P
ENSAMBLADORA IM-4P
Fig. 11
Fig. 13
7 – OPERATION
designed to hold the frames pieces
firmly together creating a tight joint.
There are 5 different sizes 5-7-10-12
and 15mm. Each type of wedges is
available for hardwood and softwood
as shown in Fig. 13.
Fig. 12
The Inmes wedges are specially
36