Inmes IM-4P Manual De Intrucciones página 40

7.1.1 - Loading and changing wedges into the magazine
There is a quick change wedge device located at the rear of the machine for
changing wedges, just rotate the know clockwise and choose the wedge showed the knob
arrow as shown in Fig. 14 and then pull the wedge shoe back as shown in Fig. 15 and 16
and place the wedge stick into the magazine. Make sure the "V" of the wedges is
positioning in the direction of the operator and the glue is upside as shown in Fig. 17.
Important: Make sure there are no wedges inside the magazine before changing the
wedge size.
Before changing the size of the wedge make sure the magazine is empty.
INMES INDUSTRIAL LTDA - GRAMPEADORA IM-4P – UNDERPINNER IM-4P
ENSAMBLADORA IM-4P
Fig. 14
Fig. 16
Fig. 15
Fig. 17
37