Electrical Installation - grandimpianti GD6 Instrucciones De Funcionamento

Ocultar thumbs Ver también para GD6:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Installation
Accessories
If the vent hose runs to an outlet in the wall, you
can prevent the inflow of cold air by fitting a
ventilation grill. This grill can be installed either
outside or inside.
If there is only one evacuation duct from the room,
a "draught check" must be fitted.
Draught check
These accessories can be purchased from your
retailer.

Electrical installation

The electrical connection must be made using a
cable for permanent installation, with a multipolar
circuit breaker, by a qualified professional.
Connection on delivery
The machine is supplied as 3-Phase, 400V, 50Hz,
heat output 3000W and has a 10A plug. Any
residual current devices must be type A.
Coin operation
The machine is prepared for coin operation. Such
installation must be carried out by a qualified
professional.
The installation requires a connection cable to
power the coin meter. This connection cable can
be ordered using the factory art. no. 92 090 95.
The coin meter shall be able to short circuit two
signal lines for periods of up to 10 minutes. This
is to give the user time to load the machine,
choose a programme and start the programme
after putting the coins in.
"Insert coin" appears on the display when the
machine is started with the main power switch.
21

Publicidad

Tabla de contenido
loading

Tabla de contenido