Troubleshooting; The Machine Will Not Start; The Machine Loses All Power During A Programme; Drying Takes Too Long - grandimpianti GD6 Instrucciones De Funcionamento

Troubleshooting

The machine will not start

Check
• that the door is properly closed.
• that the main power switch is on.
• that the Delayed Start option has not been
selected. To cancel Delayed Start, press the
Stop button for three seconds.
• that the plug is connected.
• that the main fuses have not blown.
• that the overheating cut-out has not been
triggered.
14
The machine loses all power during
a programme
The overheating cut-out shuts off the tumble dryer
if the temperature is too high, e.g. because dust
is clogging the lint filter.
• Clean the lint filter.
• Wait until the machine has cooled then try
starting it. If it still does not start: Call the
service division.

Drying takes too long

• Check that the lint filter is not blocked. See the
"Care and cleaning" chapter.

Error messages

• Read "Drying takes too long" in this chapter if
"Max program time " appears on the display.
• If "Clean Lint Filter " appears on the display,
clean the lint filter.
• Press the Stop button to close any error
messages.