Menu Structure; Additional Features; Connecting The Interface - OHAUS Scout SPX Manual De Instrucciones


Scout SPX Balances
Weighing
1. Press the Zero/On button to turn the balance on.
2. Select Weighing (this application is the default) by pressing & holding Mode
key.
3. Press Tare or Zero if necessary to begin.
4. Place objects on the pan to display the weight. When stable, the * appears.
The display shows the resulting value of the sample

MENU STRUCTURE

Sub-Menus
User Menu
Items:
Yes
No/Back
Exit
Note: Bold fonts are default settings in the menus.

ADDITIONAL FEATURES



Connecting the Interface

Use an optional interface connectivity kit to
connect the balance either to a computer,
printer or OHAUS auxiliary display.
Below Interface kit accessories are available:
RS232, USB Host, USB Device, Ethernet,
*
Bluetooth .
* Interface kits may vary according to local regulations

Scout SPX Balances
(866) 433-6682 • (281) 359-8538 • sales@novatech-usa.com • www.novatech-usa.com
C.a.l
Span
Lin
Long press -
Enter menu
Short press -
Accept
Short press –
Go to
Next/Prev.
menu
End
Short press –
Exit menu
.
S.e.t.u.p
Reset Reset
Yes/No
Filter Weighing
Low/Med/High
AZT Counting
0.5/1/3/Off
StableRange Percent
0.5/1/2//5
Backlight Check
Off/On/Auto
Auto Tare Totalize
Off/On/On-acc
Auto Off Hold
Off/1/5/10 Disp/Peak/Off
End End
* Only available in certain regions.
Interface connection on the rear of
the balance:
Interface connection
AC Adapter jack
iv Ohaus Corporation www
Quick Start Guide
M.o.d.e U.n.i.t
Reset
Yes/No
g
kg
On/Off ct
N
On/Off oz
ozt
On/Off
dwt
lb
On/Off lb:oz
grn
On/Off hkt*
sgt*
twt*
t*
tola/tical
C
End
Security slot
.
ohaus.com
E.n.d