Promax PROLITE-50 Manual De Instrucciones página 83

USER'S MANUAL. PROLITE-50/51/52
Use [ ] and [
Five are preset pulse width : 30 ns, 100 ns, 275 ns, 1.0 μs and 2.5 μs.
NOTE:
«Auto» means the default settings.
When Range is set to «Auto», pulse width will automatically become «Auto».
•
Average Time Configuration
Average time will affect the SNR directly. The longer the average time is, the
higher SNR is, as well as dynamic range. Therefore, in case of measurement of long-
distance optic fiber, long average time should be selected in order to review events at
long-distance end.
Under parameter configuration, use [
press [ ] to confirm, as shown in Figure 17. Press [
11-2015
Figure 16.- Average Time Configuration.
] to highlight pulse width; Press [
] and [
] to confirm.
] to highlight "Average time";
] to exit.
Page 25