Manufacturer's Identification Label Description - edenox DPC-28 Instrucciones De Instalación, Uso Y Mantenimiento

2.3 Intended use and limitations:
Plate dispensers are used to store, transport, distribute and heat plates. The maximum load of
the dispenser is 40-45 plates and 45kg.
The basket dispenser is used to store, transport, and distribute the baskets of industrial
dishwashers as containers for tableware. The maximum load of the distributor is 5-6 baskets 1100 mm
deep and 120 kg.
Before using the plate heating dispenser, check the electrical system for efficiency and
reliability.
After work, set the power control to 0.
Switch off the device using the control on the panel , and then disconnect the power cable of the
plate heating distributor.
WARNING:
Before the dispenser is first put into operation, it is necessary to remove the protective film and
the protective substance from the surfaces.

2.4 Manufacturer's identification label description:

XXX
Data in the identification label:
- Serial number (code+year+serialnumber)
- Code: 19XXXXXX
- Model: XXX
- CE symbol
- Waste disposal symbol
- Manufacturing site
- Manufacturing year YYYY
-Climate Class:
-Working range temperature: 30ºC/90ºC
-Voltage: 220-230V
- Frecuency: 50/60Hz
- Power consumption
3
ENGLISH