Descargar Imprimir esta página

Desa Remington 104316-04 Manual Para El Usuario página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

iMPORTANT
SAFETY
iNFORMATiON
Continued
limb could spring back and strike operator caus-
ing severe injury or death.
16. Carry chain saw flom one place to another
• with saw stopped and unplugged
• by holding _ffonthandle (never use hand guard
as handle)
• with finger elf trigger
• with guide bar and chain to rear
_Ib WARNING: This product contains
chemicals
known to the State of Cali-
fornia to cause cancer or birth defects,
or other reproductive
harm.
4Hk WARNING:
Some dust created
by
power sanding, sawing, grinding, drill=
ing, and other construction
activities
contains chemicals
known (to the state
of California)
to cause cancer, birth de-
fects, or other reproductive
harm. Some
examples
of these chemicals
are:
* lead from lead=based paints
, crystalline
silica from bricks and ce=
ment and other masonry
products
, arsenic and chromium from chemically=
treated lumber
Your risk from these exposures
varies,
depending
on how often you do this
type of work.To reduce you r exposu re to
these chemicals: work in a well ventilated
area, and work
with
approved
safety
equipment,
such as those dust masks
that are specially designed
to filter out
microscopic
particles.
KICKBACK
_,WARNING:
Kickbackmayoccurwhen
the nose or tip of the guide bar touches
an object, or when the wood closes in
and pinches the saw chain in the cut.
Tip contact
in some cases may cause a
lightning fast reverse reaction, kicking the
gu ide bar up and back towards the opera=
tot. Pinching the saw chain along the top
of the guide bar may push the guide bar
rapidly back towards the operator. Either
of these reactions
may cause you to lose
control
of the saw which could result in
serious injury to user.
Kickback
Safety Devices
On This Saw
This saw has a low-kickback
chain and reduced
kickback guide bar. Both items reduce the chance of
kickback. Kickback can still occur with this saw.
Follow assembly instructions on page 16. Do not
remove front hand guard. Do not replace front hand
guard with substitute.
The following steps will reduce the risk of kickback.
* Use both hands to grip saw while saw is running.
Use firm grip. Thumbs and fingers must wrap
around saw handles.
, Keep all safety items in place on saw. Make sure
they work properly.
, Do not overreach or cut above shoulder height.
, Keep solid footing and balance at all thnes.
* Stand slightly to left side of saw. This keeps your
body from being in direct line with chain.
, Do not let guide bar nose touch anything when
chain is moving (see Figure 2).
, Never try cutting through two logs at same time.
Only cut one log at a time.
, Do not bury guide bar nose or try plunge cut (boring
into wood using guide bar nose).
* Watch for shifting of wood or other forces that may
pinch chain.
, Use extreme caution when reentering a previous cut.
, Use low-kickback chain and guide bar supplied
with this chain saw. Only replace these parts with
chains and guide bars listed in this manual.
, Never use dull or loose chain. Keep chain sharp
with proper tension.
Saw Maintenance
and Kickback
Safety
Follow maintenance instructions in this manual. Proper
cleaning of saw and chain and guide bar maintenance
can reduce chances of kickback. Inspect and maintain
saw after each use. This will increase the service fife of
your saw. Note: Even with proper sharpening, risk of
kickback can increase with each shaq)ening.
MAINTENANCE
AND STORAGE
OF
CHAIN
SAW
1. Unplug chain saw from power source
* when not in use
, before moving from one place to another
, before servicing
, before changing accessories or attachments,
such as saw chain and guard
2. Inspect chain saw before and after each use.
Check saw closely if guard or other part has
been damaged. Check for any damage that may
affect operator safety or operation of saw. Check
for alignment or binding of moving parts. Check
for broken or damaged parts. Do not use chain
saw if damage affects safety or operation. Have
damage repaired by authorized service center.
3. Maintain chain saw with care.
, Never expose saw to rain.
Confinu(,d
108539
3
www, desatech.com

Publicidad

loading