Publicidad
1
2
5
9
12
14
14
3
4
6
7
10
13
15
English
C L E A N I N G T H E H O S E A N D N O Z Z L E . B A T T E R Y
R E P L A C E M E N T .
The vacuum cleaner stops automatically if the nozzle, tube or
hose becomes blocked, if the filter and dust bag are blocked or
if the overheat indicator starts flashing (1). Disconnect from the
mains and allow the vacuum cleaner to cool for 20-30 minutes.
Clear what is causing the stoppage and/or replace dirty filters or
the full s-bag™. Then restart the vacuum cleaner.
Tubes and hoses
2
Use a cleaning strip or similar to clear the tubes and hose.
3
It is sometimes possible to clear the hose by "massaging" it.
However, be careful in case the obstruction has been caused
by glass or needles caught inside the hose.
Note: The warranty does not cover any damage to hoses caused by
cleaning them.
Cleaning the floor nozzle
4
To avoid deterioration of suction power, frequently clean the
carpet/hard floor nozzle. The easiest way to clean it is by
8
using the hose handle.
5
Press each wheel-hub and draw away the wheels.
6
Remove dust-balls, hair or other objects that may be
entangled. Use the crevice nozzle to clean the wheel axles.
Replace the wheels by pressing them into position.
7
Larger objects can be removed by taking off the connecting
tube (press in the small catches and remove the tube).
8
Remove the object and replace the connecting tube.
Cleaning the power nozzle (certain models only)
9
Disconnect from the mains, and remove entangled threads
etc. by snipping them away with scissors.
10
Use a screwdriver to remove the nozzle cover.
11
11
Remove the brush cylinder and bearings, then clean as nec-
essary.
12
To clean the wheels, gently lever them from their mountings
and clean as necessary.
13
Replace the cover and make sure it is securely fastened.
Cleaning the turbo nozzle (certain models only)
14
Remove the nozzle from the vacuum cleaner tube and
remove entangled threads etc. by snipping them away with
scissors. Use the hose handle to vacuum the nozzle.
15
When flat, replace the batteries in the remote control handle,
as shown in the picture. We recommend use of alkaline bat-
teries.
Note: Do not throw away the batteries with household waste. Dispose
of them in special recycling containers.
Publicidad
