Zhermack ARIO 35 Manual Del Usuario página 20

CHAPTER 1: INTRODUCTION
1.1 HOW TO READ AND USE THIS USE AND
MAINTENANCE MANUAL
This Use and Maintenance Manual provides information
on the installation, use and maintenance of the ARIO 35
laboratory micromotor made by Zhermack.
• The ARIO 35 laboratory micromotor must be used in
compliance with this Manual which should be read
before installing and starting the micromotor, without
EN
omitting any of the contents and paying particular
attention to text written in bold and highlighted by
boxes and/or symbols indicating hazardous situations
or the need for attention (see paragraph 1.2).
• Respect for the instructions and recommendations
contained in this manual allows the machine to be used
and serviced safely.
• This Use and Maintenance Manual represents an
integral part of the machine. It must therefore be
available for consultation near the machine and kept
appropriately (in a dry protected weatherproof place
away from direct sunlight, etc.) throughout the working
life of the ARIO 35 laboratory micromotor, including
if the machine is transferred to other users, until the
machine is disposed of at the end of its working life.
• This Manual should be kept constantly up-to-date,
incorporating possible amendments, additions or
modifications coming from the manufacturer.
Possible notes and comments should be entered in the
space at the end of the Manual (see Annexes: Notes).
• Use the manual in such a way as to avoid damaging the
contents wholly or in part.
• Do not remove, tear or write over parts of the manual
for any reason.
• If the manual is lost or partially damaged and its
contents are no longer wholly legible, a new manual
should be requested from the manufacturer.
This Use and Maintenance Manual is aimed at operators
with the specific purpose of allowing the laboratory
micromotor to be used correctly. It contains useful
information on the use of the machine according to
the design characteristics. In particular, it contains
instructions and indications for:
• correct installation of the ARIO 35 laboratory micromotor;
• a functional description of the machine and all
components;
• first start-up;
• correct programmed maintenance;
• following elementary safety and accident prevention
rules.
The manual is divided into nine chapters, each referring
to a specific subject relevant to the machine as a whole.
In the final part of the manual, the documentation is
completed with useful Appendices.
1.2 TERMS AND SYMBOLS USED
It is fundamental that maximum attention is paid to
the following symbols and their meaning because they
20
The reference figures can be found on pages 3, 4, 5 and 6 of this manual.
highlight important information such as, critical situations,
practical advice or straightforward information.
Consult this page if in doubt regarding the meaning of
the symbol when reading the Manual.
• Any operations carried out without compliance to
instructions or tampering with equipment parts, which
can cause serious injury to persons, will be highlighted
with:
DANGER!
This symbol refers to Safety Standards that MUST
be followed in order to guarantee your safety
and that of others and to prevent damage to the
equipment.
• Critical situations concerning dangerous areas,
situations or operations in which failure to comply with
the instructions may render the warranty null and void,
cause damage to equipment, connected components
or the surrounding area, are highlighted by the symbol:
ATTENTION!
This symbol refers to Safety Standards that must
be followed carefully in order to guarantee your
safety and that of others and to prevent damage
to the equipment.
• Any operations carried out without compliance to
instructions or tampering with equipment parts, which
can cause damage to the equipment rendering the
warranty null and void, will be highlighted with:
PROHIBITED!
This symbol calls attention to operations that
are prohibited.
• Any general information and/or useful advice referring
to any subject, will be highlighted with:
NOTE!
This symbol highlights information and/or useful
advice.
CHAPTER 2: GENERAL INFORMATION
2.1 LIABILITY
Failure to comply with the instructions contained in this
Use and maintenance manual relieves the Manufacturer
from any liability. For any information not included or
that cannot be deduced from the Manual, consult the
Manufacturer directly.
Zhermack S.p.A.
Via Bovazecchino, 100
45021 Badia Polesine - RO - Italy
Tel. +39 0425 597611, Fax +39 0425 53596
http://www.zhermack.com, e-mail: info@zhermack.com
In particular, if equipment maintenance is carried out
in a way that is not in compliance with the instructions
ARIO 35