COMENDA Prime PB 24 Serie Instrucciones Para El Uso Y El Mantenimiento página 17

Part 2: Reserved for Operator
MANUAL DRAIN CYCLE
2.1.e.2 Draining water from tank for machines with drain
pump
The tank can be emptied by starting the manual drain
cycle during which only the drain pump keeps running.
IMPORTANT
T
he cycle can only be carried out by leaving the
machine ON with tank FULL of water and indifferent
whether door OPEN or CLOSED.
To perform MANUAL DRAINING, you must:
Remove the overfl ow (14)
Touch the SCROLL key
Select the C2 function from
the display
Touch the START key.
The START key turns BLUE
during the entire duration of
the cycle.
The DRAIN CYCLE starts for
the established amount of time.
The countdown of the cycle appears on the display
in seconds.
At the end of the cycle, the machine switches off
automatically and the display reads OFF.
ATTENTION
P
ressing the START key with the drain cycle in progress
interrupts the DRAIN cycle.
START START
the machine switches off automatically and the display
reads OFF.
2.1.f SELF-WASHING (and DRAIN)
A SELF-WASHING (and DRAIN) cycle can be carried out
at the end of the day
T
he cycle can only be carried out by leaving the
machine ON with tank FULL of water and the door
CLOSED, unloading the overfl ow.
To perform the SELF-WASHING cycle, you must:
Touch the SCROLL key
Select the C1 function on the
display.
Touch the START key.
The START key turns BLUE
during the entire duration of the
cycle.
The SELF-WASHING CYCLE
begins.
The countdown of the cycle appears on the display in
START START
seconds.
At the end of the SELF-WASHING cycle, the machine will
have drained the water from the tank.
At the end of the cycle, the machine switches off automa-
tically and the display reads OFF.
2.1.g TEMPERATURE reading
It is possible to view both the ACTUAL and SET tem-
perature in the boiler and in the tank for the selected
cycle with the machine ON.
Press the BACK key to display
the temperature value.
The SET temperature value
of the water in the tank and
the water in the boiler appears
on the display.
Press the BACK key to
display the ACTUAL tempe-
rature value.
If no key is pressed, after about 5 sec, the SET tem-
peratures appear on the display.
ENGLISH
IMPORTANT
START START
SET (example)
ACTUAL (example)
15