Listado De Parámetros - Vega VEGAPULS 69 Instrucciones De Servicio

Listado de parámetros
La tabla siguiente da un resumen sobre los parámetros utilizados.
FF desciptor
PRIMARY_VALUE
PRIMARY_VALUE_UNIT
SECONDARY_VALUE_1
SECONDARY_VALUE_1_UNIT
SECONDARY_VALUE_2
FILL_HEIGHT_VALUE
FILL_HEIGHT_VALUE_UNIT
CONST_VALUE
SECONDARY_VALUE_1_TYPE
SECONDARY_VALUE_2_TYPE
FILL_HEIGHT_VALUE_Type
DIAGNOSIS
DIAG_MASK_1
DIAG_OUT_1
DIAG_MASK_2
DIAG_OUT_2
DEVICE_IDENTIFICATION
DEVICE_NAME
IS-SPARE_ELECTRONICS
DEVICE_VERSION_INFO
CALIBRATION_DATE
FIRMWARE_VERSION_ASCII
HW_VERSION_ASCII
ADJUSTMENT_DATA
FIRMWARE_VERSION_MAIN
PHYSICAL_VALUES
DEVICE_UNITS
APPLICATION_CONFIG
LINEARIZATION_TYPE_SEL
SIMULATION_PHYSCAL
INTEGRATION_DATA
VEGAPULS 69 • Foundation Fieldbus
Description
PRIMARY_VALUE (Linearized value). This is the process value after min/
max adjustment and Linearization with the status of the transducer block.
The unit is defined in "PRIMARY_VALUE_UNIT"
Selected unit code for "PRIMARY_VALUE"
This is the measured value after min/max adjustment with the status of the
transducer block. The unit is defined in "SECONDARY_VALUE_1_UNIT"
Selected unit code for "SECONDARY_VALUE_1"
This is the distance value ("sensor_value") with the status of the transdu-
cer block. The unit is defined in "SECONDARY_VALUE_2_UNIT"
Filling height. The unit is defined in "FILL_HEIGHT_VALUE_UNIT"
Filling height unit
Constant value
Secondary value 1 type
Secondary value 2 type
Filling height value type
AITB Diagnosis
Manufacturer ID, device type, bus type ID, measurement principle, serial
number, DTM ID, device revision
Device name
Device name
Hard- and software version for system, function and error
Day, month and year
Software version
Hardware version
Min./max.-adjustment physical, percent and offset
Software versions major, minor, revision and build
Distance, distance unit, distance status, level and status
Distance and temperature units of the instrument
Medium type, media, application type, vessel bottom, vessel height
Type of linearization
Physical offset and integration time
11 Anexo
77