Festo ELGA-TB-G Instrucciones De Utilizacion página 35

ELGA-TB-G/-KF/-RF
• Position the rated load in such a way that the break-down
torque resulting from force F (parallel to the axis of motion) and
lever arm a remains as low as possible (è Fig. 10).
• Avoid collisions of the tool and payload with mounting parts
(è Fig. 11).
For attachment components with their own guide:
• Adjust the guides of the tool and axis so that they are exactly parallel, or use a connection that
permits tolerance compensation. In this way, you will avoid overloading the guide.
Mounting
• Fasten the attachment to the slide with screws and centring
sleeves. Observe maximum screw-in depth D and tightening
torque (è Tab. 2).
Size
Screw
Max. screw-in depth D
Tightening torque
Centring H7
Tab. 2
Festo – ELGA-TB-G/-KF/-RF – 1502c English
70
M5
[mm] 7.5
[Nm] 5.9
@ 5
G, KF [mm]
@ 9
KF, RF [mm]
A
Fig. 10
Fig. 11
Fig. 12
80 120
M5 M6 M5 M6
9.5 12.5
5.9 9.9 5.9 9.9
@ 9
F
150
M6 M8
14
9.9 24
35