Joie spin 360 Manual De Instrucciones página 13

!
After attaching the ISOFIX, pull the
load leg downward to floor. When
the load leg indicator shows green,
the load leg is installed correctly.
!
Squeeze the load leg releasing
button, then adjust the load leg
length.
7
!
The load leg has 14 positions.
When the load leg indicator shows
red this means the load leg is in the
wrong position.
!
Make sure the load leg is in full
contact with the vehicle floor pan.
Red means it is installed
incorrectly.
!
Check to make sure the base is
securely installed by pulling on
both ISOFIX connectors.
!
The ISOFIX connectors must be
attached and locked onto the
ISOFIX anchor points.
!
The load leg must be installed
correctly with green indicator.
Please refer to rear facing mode and
recline positions mode in section to
use the child restraint.
8
8
-1
9
7
8
9
-2
9
1
2
10