Information And General Rules; Explanation Of Symbols; Identification Data - Bertolini 140 Uso Y Mantenimiento

CONTENTS
- Information and general rules ............... 33
- Explanation of symbols ......................... 33
- Identification data .................................. 33
- Overall dimensions ............................... 34
- Speed .................................................... 34
- Technical data ....................................... 34
- Controls ................................................. 35
- Engine start-up ...................................... 35
- Engaging gears ..................................... 36
- Power take-off ....................................... 36
- Differential Lock .................................... 36
- Handlebars ............................................ 36
- Unlocking cutter bar .............................. 36
- Operation (141 M) ................................. 37
- Adjustment (141 M) ............................... 37
- Brake assembly instructions ................. 38
- Controls operation (140 L) .................... 38
- Assembly and disassembly
of cutter bar and accessories ................ 38
- Safety devices
Engine Stop ........................................... 39
Gear Hook ............................................. 39
- Lubrication ............................................ 39
- Gearbox oil replacement ....................... 39
- Controls adjustment
Brakes ................................................... 40
Reversing gear control lever ................. 40
Clutch .................................................... 40
Differential lock ...................................... 40
Quickfit shutter lock/unlock lever ........... 40
- Airborne noise ....................................... 40
- Handlebar vibration ............................... 40
- Application of frontal cutter bar ............. 41
- Maintenance of frontal cutter bar .......... 41
PREFACE
Before using the machine, read
this manual carefully and keep
it for future reference.
The Manufacturer reserves the
right to make modifications,
without prior notice and without
incurring
whatsoever, provided that the
main technical and safety features be kept.
any sanctions
INFORMATION
AND GENERAL RULES
SPARE PARTS
You are highly recommended to use only
GENUINE SPARE PARTS. Orders must be
made observing the rules given in the Spare
Parts Catalogue.
ENGINE SERVICING
The regulations for using and servicing the
engine are given in the appropriate booklet, a
copy of which is provided with each machine.
NOTE
The terms RIGHT and LEFT used in this
manual to locate the various components,
always refer to the normal travel direction of
the machine, that is to the machine seen by
the operator in the driver's position.
EXPLANATION OF THE SYMBOLS
Throttle
control
Travel
direction
Fig. 1

IDENTIFICATION DATA

On receiving the machine check for the "CE"
label on top of the Gearbox, near the serial
number printed on the sump (see Fig. 1).
IMPORTANT!
Whenever requesting technical service or
ordering spare parts, always give the serial
number of the machine in question.
Brake
control
Differential
lock lever
Clutch
control
33