Important Information; Installation Standards - AERMEC VEC Serie Manual De Instalacion Y Uso

8.

IMPORTANT INFORMATION

The VEC_I AERMEC units are con-
structed according to the recog-
nised technical standards and
safety regulations. They have been
designed and must be used for
air conditioning and heating pur-
poses, in accordance with their
technical features.
Any contractual or extra-contractu-
al liability of the Company is ex-
cluded for injury/damage to per-
sons, animals or objects owing to
installation, regulation and main-
tenance errors or improper use.
All uses not expressly indicated in
this manual are prohibited.
Use suitable Personal Protective
Equipment (PPE) during installa-
tion, maintenance, and cleaning
stages.
Do not use the unit as storage for
equipment or spare parts. Any
use other than that indicated in
this manual is prohibited as it can
generate dangerous situations.
ATTENTION: the electric and hy-
draulic connections, together
with installation of the fan coils
and their accessories must only
be performed by technicians who
have the technical-professional
requisites for installation, trans-
formation, extension and mainte-
nance of the systems and who can
verify these functions in terms of
safety and functionality (in ac-
cordance with the national laws
in force in the country of installa-
tion). In this manual they will be
also identified as: experienced and
qualified technician with specific
technical knowledge.
AERMEC will not be liable for dam-
age due to failure to follow these
instructions.
Make sure the unit has not been
damaged during transport before
installation.
• using a damaged machine could be
dangerous.
• the support surface must withstand
the weight of the unit.
Note:
Always indicate the serial number
for future reference and for any
communication with AERMEC
S.p.A.
STORING THE DOCUMENTATION
Hand over the instructions with all
the related documentation to the
system user, who must store the
instructions so that they are al-
ways available in case of necessity.
WARNINGS REGARDING SAFETY AND

INSTALLATION STANDARDS

Follow the indications below to
install the equipment correctly.
The completion of all operations,
according to specific require-
ments, is left to the experience of
the installer.
Do not modify or tamper with the
units, as dangerous situations can
occur. The manufacturer will not
be liable for any damage caused.
The validity of the warranty shall
be void in the event of failure to
comply with the indications men-
tioned in this manual.
Before starting any operations,
READ THESE INSTRUCTIONS CARE-
FULLY AND CARRY OUT THE SAFE-
TY CHECKS TO AVOID ALL RISKS.
All the staff involved must have
thorough knowledge of the opera-
tions and any danger that may
arise when the installation opera-
tions are carried out.
The unit must be installed to facili-
tate routine (filter cleaning) and
special maintenance operations.
ATTENTION: the fan coil is con-
nected to the power supply and
the hydraulic circuit. Operations
performed by persons who do not
have the required technical skills
can lead to personal injury to the
operator or damage the unit and
the surrounding environment.
ATTENTION: The unit must be
installed in compliance with na-
tional regulations.
ATTENTION: make sure that the
power supply has been discon-
nected before carrying out any
interventions.
ATTENTION: Install a device,
master switch or electric plug that
allows the unit's power supply to
be completely disconnected.
ATTENTION: In order to protect
the unit against short circuits,
mount a magnet circuit breaker
omnipolar switch on the power
supply line. In order to avoid
any danger due to the accidental
rearming of the thermal cut-out
device, this appliance must not be
powered with an external switch-
ing device, such as a timer, or be
connected to a circuit that is regu-
larly powered or disconnected
from the service.
ATTENTION! DANGER! Any use
other than what is indicated by
Aermec is prohibited.
SUPPLY THE FAN COIL ONLY
WITH THE VOLTAGE VALUE IN-
DICATED IN THE DATA PLATE
The fan coil may be permanently
damaged if a different electric
power supply is used.
VEC_I 1903 - 5074551_04
13