Connecting The Power Supply - DXV AT200 LS SpaLet Manual De Instalación

7302348-100 (11/17)
CONNECTING THE WATER
C-5
SUPPLY HOSE
1
Remove the protective cap and insert the water
supply hose into water shutoff valve.
2
Fasten with the clip. Rotate the clip and check if the
water supply hose is properly secured with the clip.
Note:
• Secure the clip by folding it.
• If the clip is not secured properly, remove and
secure again. Insert the tool to open the clip and
unlock it.
Fully open the lever of the water supply hose and
3
rotate it 90°in reverse.
Note: To prevent anchoring, be sure to rotate
CONNECTING THE POWER
C-6
SUPPLY
1
Connect the power cord to the AC outlet.
Turn on the power at the power breaker.
90°
- 13 -
the lever 90°in reverse.