Installing The Remote Control - DXV AT200 LS SpaLet Manual De Instalación

INSTALLING THE REMOTE
C-7
CONTROL
Remove the remote control from the holder and
1
insert the batteries.
Note: Vertical lines may appear on the screen
when the batteries are removed. This is not
a malfunction. These vertical lines will
disappear when batteries are inserted into
the remote control.
Determine the installation position of the remote
2
control.
Note: Leave a space above the remote
control's mounting position
Press the ( ) button and register to the SpaLet
3
unit.
Mount the remote control holder onto the wall.
4
a
For plasterboard or plywood that is thinner
than 3/16".
b
For concrete
Insert the anti-theft nut into the groove on the re-
5
mote control.
6
Attach the remote control to the holder.
Secure the remote control to the holder with the
7
anti-theft washer and screw.
7302348-100 (11/17)
7
No.0
®
- 15 -