Important Safety Instructions; General Safety Rules; Safety Instructions For All Saws - Evolution RAGE 5 Instrucciones Originales

IMPORTANT SAFETY INSTRUCTIONS

To reduce the risk of electric shock, this
equipment is fitted with an approved cord and
plug for its intended country of use. Do not
change the cord or plug in any way.

GENERAL SAFETY RULES

Read and understand all instructions before
operating this product. Failure to follow all
instructions listed below may result in electric
shock, fire and / or serious personal injury.
SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE.
WARNING
: When using electric tools basic
safety precautions should always be followed
to reduce the risk of fire, electric shock and
personal injury including the following:
Read all these instructions before
attempting to operate this product and save
these instructions.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.

SAFETY INSTRUCTIONS FOR ALL SAWS

WARNING:
Read all instructions. Failure
to follow all instructions listed below may
result in electric shock, fire and/or serious
injury.
SAVE THESE INSTRUCTIONS
1) Work area safety
a) Keep work area clean and well lit.
Cluttered and dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
www.evolutionpowertools.com
c) Keep children and bystanders away
while operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded)
power tools.
Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed
or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is
an increased risk of electric shock if your body
is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat,
oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors,
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing
and use common sense when operating
a power tool. Do not use a power tool
while you are tired or under the influence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury.
b) Use safety equipment. Always wear
eye protection. Safety equipment such as
6