Optional Parts, Accesories And Tools; Optional Installation Parts; Accessory And Installation Parts - Toshiba RAS-B10SKVP-E Manual De Instalación

01_Installation_EN.fm Page 4 Tuesday, December 26, 2006 4:36 PM

3 OPTIONAL PARTS, ACCESORIES AND TOOLS

Optional Installation Parts

Part Code Parts name
Refrigerant piping
Y
RAS-B10SKVP-E, B13SKVP-E
RAS-M10SKCVP-E, M13SKCVP-E
RAS-B16SKVP-E, M16SKCVP-E
Shield pipe (for extension drain hose) (polyethylene foam, 6 mm thick)
Z
Attachment bolt arrangement of outdoor unit
• Secure the outdoor unit with the attachment bolts and nuts if the unit is
likely to be exposed to a strong wind.
• Use φ8 mm or φ10 mm anchor bolts and nuts.
• If it is necessary to drain the defrost water, attach drain nipple to the
base plate of the outdoor unit before installing it.

Accessory and Installation Parts

Part No. Part name (Q'ty)
a
Installation plate x 1
b
Wireless remote controller x 1
c
Battery x 2
Others Name
Owner's manual
Installation manual
Important information
and warning*
B/W strips
(Energy efficiency labels)
When using a multi-system outdoor unit, refer to the installation manual provided with the model
concerned.
EN
Tel: 01823 665660
Heronhill - for all your Toshiba requirements
Indoor unit name
Part No. Part name (Q'ty)
d
Remote controller holder x 1
e
Plasma pure filter x 1
Mounting screw
f
This model is not equipped with an
extension drain hose.
Option:
For the extension drain hose, use the
optionally available RB-821SW or a
commercially available one.
www.heronhill.co.uk
Liquid side Gas side
(Outer diameter) (Outer diameter)
6.35 mm 9.52 mm
6.35 mm 12.7 mm
Elongated drain
hole
(i)
Part No.
g
h
i
φ4 x 25L x 6
Parts marked with asterisk (*) are packaged with the
outdoor unit.
4
Q'ty
1 ea.
1
Suction side
Drain hole
Diffuser
(h)
Part name (Q'ty)
Remote controller holder
mounting screw
φ3.1 x 16L x 2
Drain nipple* x 1
(RAS-10SAVP-E, 13SAVP-E,
16SAVP-E)
Water-proof rubber cap* x 2
(RAS-10SAVP-E, 13SAVP-E,
16SAVP-E)
Fax: 01823 665807