Replace Battery; Replace Probe - KPS MT60 Manual De Funcionamiento Manual De Funcionamiento

KPS-MT60 • Digital multimeter
ing. If the display shows only "OL", the input is out of the selected input
range, so please rotate the switch to a higher measuring range.
5. MAINTENANCE

5.1 Replace battery

Before opening the meter battery cover, remove probe from the circuit to be
measured to avoid electric shock.
• When the battery indicator "
immediately.
• Unscrew the fastening screw of the meter battery cover and remove it.
• Replace battery.
• Install the battery cover.
Note:
The battery polarity can't be reversed.

5.2 Replace probe

When replacing probe, replace with another identical probe or one with the
same capacity. The probe should be in good condition with a capacity of
1000V, 10A.
If the probe is damaged, such as having a bare metal wire, it should be re-
placed immediately
Warning
" appears, the battery should be replaced
Warning
37