Relative Measurement Mode Switch; Maximum/Minimum Measurement Choice; Function Switch - KPS MT60 Manual De Funcionamiento Manual De Funcionamiento

KPS-MT60 • Digital multimeter
Note:
Frequency measurement can't be set to manual measuring range mode.

4.3 Relative measurement mode switch

• Press "MAX/MIN" key. Iin each measuring range, the meter will enter maxi-
mum measurement state. Press "MAX/MIN" key again, and the meter will
enter minimum value measurement state. Press "MAX/MIN" key for the third
time, and the meter will enter normal measurement state, and record maxi-
mum and minimum in the chip.

4.4 Maximum/minimum measurement choice

• Press "MAX/MIN" key. Iin each measuring range, the meter will enter maxi-
mum measurement state. Press "MAX/MIN" key again, and the meter will
enter minimum value measurement state. Press "MAX/MIN" key for the third
time, and the meter will enter normal measurement state, and record maxi-
mum and minimum in the chip.

4.5 Function switch

• When measuring voltage and current, press "FUNC" key to switch AC volt-
age and AC current.
• When measuring voltage and current, press "FUNC" to switch different
measuring signals.
4.6 Backlight
• Press " " key, turn on or off backlight.
4.7 Automatic power-off
• If there is no operation for 30 minutes after turning the machine on, the meter
will automatically power off to save the battery.
• After automatic power-off, press any key to turn the meter on again.
• Holding the "FUNC" key when powering on will cancel automatic power-off
function.
4.8 USB communication
• Install KPS-MT60 communication software and USB driver in PC (see PC
software operation manual in the attached CD for details).
• Use USB cable to connect the meter and PC. The meter will display
33