Sime OPEN.zip 25 BF TS Instrucciones Para El Instalador página 75

TO SET THE HEATING AND SANITARY
WATER TEMPERATURE FROM THE
REMOTE CONTROL PANEL
The boiler temperature can be regulated at
intervals of 0.5°C by means of the keys
[SAN] and [RISC] only when there is a con-
nection
The setting is memorised in the boiler and
remains independently of the remote con-
trol.
INITIAL PARAMETERS AND RE-MEMORISATION PROCEDURE
After pressing the key (reset), see point "TO ENABLE RE-MEMORISATION" in paragraph "LANGUAGE/DATE/TIME REGULATION"; the fac-
tory parameters are reset, which are the same for both the winter and the between season programmes:
SET: min = 6
T1 = 16 °C
T2 = 18 °C
T3 = 21 °C
manual = 21 °C
LANGUAGE = Italian
TIME = 0 - 24
PLEASE NOTE: To change the
value set for a level, see para-
graph "PROGRAMMING"
DISCONNECTION OF REMOTE CONTROL
The sanitary and antifreeze functions are guaranteed in any case, even if the remote control is disconnected.
PLANT WITH RADIATORS
[ + ] and [ - ]: increase/decrease
(+/- 0.5°C) sanitary water temperature
[SAN]: exit sanitary water temperature
setting
PROG: WINTER
PROG: BETWEEN SEASON
SET HEATING
Min Max
40°C 80°C
from MONDAY to SUNDAY
from MONDAY to SUNDAY
SET SANITARY
Min Max
35°C 60°C
[ + ] and [ - ]: increase/decrease
(+/- 0.5°C) heating temperature
[RISC]: exit heating temperature setting
From - to Level Value
00:00 - 06:00 T1 16 °C
06:00 - 09:00 T3 21 °C
09:00 - 12:00 T2 18° C
12:00 - 15:00 T3 21 °C
15:00 - 18:00 T2
18:00 - 22:00 T3
22:00 - 24:00 T1 16 °C
18°C
21°C
Fig. 9
73