PR 9113 Manual De Instalación página 54

Safety Manual
27
28
29
30
31
32
33
34
35
36
37
38
16
9113 TeMpeRaTuRe / ma CONVeRTeR
action
Verify Ni sensor type and press OK
(ONLY IF SeNSOR = Ni and CH2.TYp = TeMp)
Verify Thermocouple type and press OK
(ONLY IF SeNSOR = TC and CH2.TYp = TeMp)
Verify CJC type and press OK
(ONLY IF SeNSOR = TC and CH2.TYp = TeMp)
Verify fixed output range for current output
Verify fixed output value on detected sensor error
and press OK
(ONLY IF CH2.TYp = TeMp, or IF I.RaNGe = 4-20
ma or 20-4 ma)
Verify temperature for 0% output and press OK
(ONLY IF CH2.TYp = TeMp)
Verify temperature for 100% output and press OK
(ONLY IF CH2.TYp = TeMp)
Verify analogue output response time and press OK CH1.CaL
Verify the use of applied process calibration values
for Channel 1 and press OK
Verify the use of applied process calibration values
for Channel 2 and press OK
Verify password and press OK
Verify SIL mode within 1 second
Version No. V5R0
Display shows
TC.TYpe
CJC
O.RaNGe
OuT.eRR
OuT.LO
OuT.HI
ReSp
CH2.CaL
paSSW.
SIL.OK