Incompatible Vehicle Seat Belts; Maintenance; Seat Cover - Britax ROUNDABOUT Guia Del Usuario

BRITAX Child Safety, Inc.

Incompatible Vehicle Seat Belts

The following types of vehicle seat belts are NOT
compatible with this child seat. If any of the belt types
listed below are in the chosen seating position, choose
another vehicle seating position or check your vehicle
owner's manual for information on installing a car seat in
your vehicle.
Lap belts with a sewn-in
latch plate that have a
retractor that locks only in
case of a sudden stop.
Lap-shoulder belts with top
or bottom anchor points on
the vehicle door.

Maintenance

Seat Cover

Removing the Cover
Never remove the buckle tongues from the harness.
They cannot be reattached after removal. If reassembled
incorrectly, the child seat may not perform as intended.
1. Loosen the harness.
a. Lift the release lever.
b. Pull both harness
straps forward.
34
Lap belts forward of
the vehicle seat bight.
Motorized, automatic
vehicle seat belts.
1b
1a
2. Open the chest clip.
a. Press tabs.
b. Pull apart.
3. Remove the infant
positioning pillow, if
necessary and unbuckle
the harness.
4. Remove the belly pad
from the harness buckle.
a. Pull the buckle
through the belly
pad.
b. Remove the elastic
strap from around
the buckle.
5. Unhook both harness
straps from the yoke.
6. Pull the harness straps
through the shell and
cover to the front of the
child seat.
7. Detach the plastic hooks
from the bottom edge of
the child seat.
8. Pull the buckle through
the slot in the cover.
9. Remove the cover from
the child seat shell.
ROUNDABOUT User Guide
2b
2a
4a
4b
35