Mobile Phone - SCHUBERTH SRC-SYSTEM Manual Del Usuario

7.1 MOBILE PHONE

To use your Bluetooth® mobile phone with the SRC-System™, you must
first pair the two devices.
NOTE: If you plan to use a GPS device in parallel with your mobile phone, then you
should pair your mobile phone to the GPS device and not to the SRC-System™. In
such case, skip this section and proceed directly with section 7.2.
Pairing is a one time process. Once the headset is paired to a specific mobile
phone, they will remain paired and automatically recognize each other whenever
they are within range.
If the connection between the phone and headset is lost, tap the Mobile Button
on your headset to reconnect the devices.
PAIRING A MOBILE PHONE:
1. Turn on your phone and make sure its Bluetooth® function is activated. Turn on
your headset by pressing the Mobile Phone Button for at least three seconds
resulting in three blue flashes.
2. With the SRC-System™ turned ON, press and hold the Mobile Button for at
least six seconds until the Red and Blue Lights begin rapidly alternating.
3. Search for Bluetooth® devices on your phone by following the phone's instruc-
tions. Consult your phone's User Manual for more information.
4. After a few seconds the phone will list "SRCS" (incl. its software version)
as a discovered device. Select it and follow your phone's instructions to accept
the pairing.
5. When prompted, enter 0000 (four zeros) as your PIN or passkey.
6. Your phone will confirm that pairing has succeeded and the headset will begin
flashing slowly in Blue.
NOTES:
1. With some mobile phones, you may need to tap the Mobile Button to connect
the headset to the phone after pairing is complete. The SRC-System™ will
automatically connect to the last phone connected to the headset.
2. If the pairing process is not completed within two minutes the headset will return
to Standby mode
MAKING AND RECEIVING MOBILE PHONE CALLS
BASIC FUNCTIONS
Answer a call
Tap the Mobile Button or speak loudly any word of your choice
Reject a call Remain silent for 15 seconds, or press and hold the Mobile
Button for 3 seconds during an incoming call
End a call
Tap the Mobile Button during a call, or let the other party
terminate the call
Voice Dial During Standby, tap the Mobile Button and pronounce loudly
(if supported by the name of the person you wish to call.
mobile phone)
Redial* During Standby, tap the Mobile Button twice
ADVANCED FUNCTIONS FOR 3-WAY COMMUNICATION:
Add/Remove Tap the CHANNEL "A" button while on a phone call
CHANNEL "A" headset
to/from phone call
Add/Remove
Tap the CHANNEL "B" button while on a phone call
CHANNEL "B" headset
to/from phone call
* This feature is not available during intercom or mobile phone calls.
When the headset is on an active phone call, any Intercom call request will be
automatically rejected.
Once the phone call ends, you can make and accept Intercom calls again.
Not all Bluetooth® mobile phones can broadcast Bluetooth® Stereo music (A2DP),
even if the phone has an MP3 player application. Consult your mobile phone's
User Manual for more information.
13