Master Access Modes; Timer Mode (Master Access) - Petsafe 1000 Serie Manual De Adiestramiento

Access comes in . Default factory setting is Off with 10 sound options available .
Out-Tone: Optional audible tone that sounds when any pet set to Master Access goes out . Default factory setting is Off with 10 sound options
available .

Master Access Modes

There are 4 Master Access Modes: In/Out, In-Only, Out-Only, and Timer .
In/Out: The default access mode and allows any pet wearing a programmed Passport
In-Only Mode: Allows pet(s) wearing a programmed Passport
to take your pet(s) to the vet or if you want to keep your pet(s) in at night .
Out-Only Mode: Allows pet(s) wearing a programmed Passport
Timer Mode: Allows the other access modes (In/Out, In-Only, Out-Only) to be programmed at specific times of day for pet(s) . Four
programmable time slots available with a minimum of two programmed times required .
To Change Master Access Mode:
1 . To change the Master Access Mode, from Main Menu select Setup > Pet Settings > Master Access .
Use right arrow key to select . Mode will be displayed at top of Master Access Menu .
2 . Use right arrow key to scroll through and select desired mode option (In/Out, In-Only, Out-Only, or Timer) .
Press left arrow/back key to return to Main Menu .
Note: If Timer Mode is selected, Access Times must be set with a minimum of two programmed times required
(see "Timer Mode") .

Timer Mode (Master Access)

Timer Mode under Master Access Mode allows you to easily set the Dog Door to one of the other access options (In/Out, In-Only, or Out-Only) at
specific times of day for all programmed pets . This is useful if you want your pets to have a certain access during a specific time period (for example
at night) . There are four programmable time slots available with a minimum of two programmed times required . The two times are required to
prevent your pet from accidentally being locked out or in .
To Set Timer Mode:
1 . From Main Menu select Setup > Pet Settings > Master Access
> Mode .
2 . Press right arrow key to scroll to Timer option to select .
3 . Once Timer Mode has been selected, Access Time will appear at
bottom of Master Access Menu list . Use down arrow key to highlight
Access Time then right arrow key to select .
4 . The Access Time screen will list four available time slots . Press right
arrow key to select first time slot .
5 . The first line listed on Access Time menu is to select the pet access
mode . Use right arrow key to scroll through and select desired pet
access mode: In/Out, In-Only, or Out-Only .
6 . Use down arrow key to highlight Time . Press right arrow key to enter
specific time for your pet(s) to have type of access you just selected in
step 5 . After you use arrow keys to enter desired time, press enter key
to accept . Press left arrow/back key to return to Access Time menu
screen .
7 . Use down arrow key to highlight second time slot . Press right arrow key
to select . Repeat steps 5 & 6 to select pet access mode and scheduled
time for the access . Repeat steps for as many times as you want to
schedule . Remember a minimum of 2 programmed times are
required but up to 4 time slots are available . After you select and enter
desired access options and scheduled times, review the Access Time
menu screen to make sure what you entered is correct .
If 2 time slots have NOT been programmed, you will receive an
error screen. The Master Access Mode will then default back to
In/Out Mode.
6
Key to enter or exit as they please .
™
Key to enter through the Dog Door but pet(s) cannot exit . This is useful if you need
™
Key to exit through the Dog Door but pet(s) cannot enter .
™
www.petsafe.net