Pet Access (Individual Pet); Pet Access Mode (Individual Pet) - Petsafe 1000 Serie Manual De Adiestramiento

the dog's Passport Key) .
™
Remove Pet: Allows a pet who is programmed to the Dog Door to be deleted with all programmed settings removed .

Pet Access (Individual Pet)

Under each individual pet, the Pet Access menu allows the Access Mode, Re-latch Time, In-Tone, and Out-Tone to be changed for that specific pet .
To open the Pet Access menu, from Main Menu select Setup > Pet Settings > Pet 'X' (or name of pet) > Pet Access . Press right arrow key to
select . Under the Pet Access menu are the following options:
Mode: Access mode set for the individual pet which overrides the Master
Access Mode . There are five modes: Master (which is the default factory
setting), In/Out, In-Only, Out-Only, and Timer .
Re-latch Time: Default Re-latch Time is 2 seconds but can be changed
from 1 second to 60 seconds for each pet and is useful if you have an
older or slower pet . If Master Mode is selected as the individual pet access
mode, then the individual Re-latch Time cannot be adjusted .
In-Tone: Default is off but 10 tone options available . If Master mode is
selected as the individual pet access mode, then the individual In-Tone cannot be adjusted .
Out-Tone: Default is off but 10 tone options available . If Master mode is selected as the individual pet access mode, then the individual Out-Tone
cannot be adjusted .

Pet Access Mode (Individual Pet)

The Access Mode can be programmed for each individual pet . This allows you to customise access based on each of your pet's needs . The Access
Mode options available are:
Master: Under each individual pet, when Master mode is selected, the pet will be programmed to all settings under Master Access including
Access Mode, Re-latch Time, In-Tone, and Out-Tone . Master is factory default individual Pet Access Mode .
In/Out: Allows a programmed pet to enter and exit as they please .
In Only: Allows a programmed pet to enter but not exit .
Out-Only: Allows a programmed pet to exit but not enter .
Timer: Allows the other pet access modes (In/Out, In-Only, Out-Only) to be programmed at specific times of day by pet . Four programmable time
slots available with a minimum of two programmed times required .
To Change Pet Access Mode:
1 . From Main Menu select Setup > Pet Settings > Pet 'X' (or name
of Pet) > Pet Access . Use right arrow to select .
2 . Use right arrow key to scroll through Pet Access Modes to select
desired mode: Master, In/Out, In-Only,Out-Only, or Timer .
Press left arrow/back key to return to Main Menu .
Note: If Master Mode is selected, all other setting options under the
Pet's menu will not show on the screen because they cannot be changed .
These settings for the pet will default to the ones under Master Access (see
"Master Access") . If Timer Mode is selected, Access Times must be set with a minimum of two programmed times required (see "Timer Mode") .
www.petsafe.net 9