Replacing License Plate Lamp Bulbs; Replacing Fog Lamp Bulbs (If Equipped) - Ford Escape 2008 Manual Del Propietário

Lights

Replacing license plate lamp bulbs

1. Make sure the headlamp switch is
in the OFF position.
2. Depress the lever and carefully
pry the license plate lamp assembly
(located above the license plate)
from the liftgate.
3. Rotate the bulb socket
counterclockwise and remove from
lamp assembly.
4. Pull bulb straight out of socket
and push in the new bulb.
5. Install the bulb socket into the
lamp assembly and rotate clockwise.
6. To install, carefully press the
lamp assembly into liftgate.

Replacing fog lamp bulbs (if equipped)

1. Make sure the fog lamp switch is
in the OFF position.
2. From underneath the vehicle,
remove the harness/bulb assembly
from the lamp assembly.
3. Carefully disconnect the bulb
from the harness assembly via the
two snap clips.
Install the new bulb in reverse order.
53
2008 Escape (204)
Owners Guide (post-2002-fmt)
USA (fus)