Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3.4 RECHARGEABLE BATTERY OPERATION
Note: Please charge the battery before using the scale for the first time.
•
The
indicator above
power. If scale goes on being used without proper charging, LO-BAT words will flicker on the display.
•
Approximately 30 minutes of instrument usage are left; afterwards it will shut off automatically.
•
Please use the supplied battery charger for charging the battery immediately, or scale cannot be used.
3.4.1 CHARGING THE BATTERY
•
Before the first use, the battery should be charged by connecting it to the mains power supply for at least 5 hours.
•
When the scale is plugged into the mains power the internal battery will be recharged.
•
Verify that the AC power socket outlet is properly protected.
•
Under right side of the weight display there is an charging LED to indicate the status of battery charging
•
Charge status of rechargeable battery is indicated by the LED display.
•
Yellow:The battery is being charged
•
Red: The battery is nearly discharged
•
Green: Rechargeable battery is completely charged
3.4.2 BATTERY MAINTENANCE
•
Do not use any other type of power adaptor than the one supplied with the scale.
•
Recharge battery should be changed in every three months when not in use.
•
If the scale is not used for an extended period of time,remove the battery from the battery compartment to avoid leakage.
•
Store the battery in a sealed bag or box in a dry, temperate environment.
•
Do not throw away as rubbish of daily life.
4. DISPLAY & KEYS FUNTION
4.1 KEY BOARD
KEYS
DESCRIPTION
ON/OFF key, turn the scale on / off.
1) Zero key, Used to clear and zero the display.
2) Enter key. Used to enter the selected menu,sub-menu and setting.
1) Tare key, Used to perform a tare function, Subtracts weights.
2) Setup menu key.Used to enter the setup menu during self-checking.
3) To change the menu option in menu setting.
1) Used to shift the gross weight and net weight.
2) Right arrow key. Used to move the digit to the right.
3) Escape key ,Used to escape from menu setting.
1) Sleep mode key, Used to enter sleep mode in normal weighing mode.
2) Clear the active digits in setting mode.
indicator appears indicates that the battery is getting low. It's time to charge the battery with the AC
USERS GUIDE SMC
EN
EN
29
29
Publicidad
Tabla de contenido
