Control Unit Messages; Status Indication; Warning And Error Messages During Operation - BONFIGLIOLI Vectron ACTIVE CUBE Serie Guia De Inicio Rapido

7 Control unit messages

LED
green red Display
off off -
on on -
flashing off RUN flashing
on off RUN
on flashing RUN + WARN
flashing flashing RUN + WARN
off flashing FAULT flashing
off on FAULT
7.1

Warning and error messages during operation

The code displayed via parameter
A0088 signals warnings A0008 + A0080, for example.
Key
A0000 No warning present.
A0001 Frequency inverter overloaded, warning code (A0002 or A0004)
A0002 Frequency inverter overload (60 s). Check load behavior.
A0004 Short-term overload (1 s). Check motor and application parameters.
A0008 Max. heat sink temperature reached, check cooling system and fan.
A0010 Max. interior temperature reached, check cooling system and fan.
A0020 Speed set point is limited by a controller.
A0080 Max. motor temperature reached, check motor and sensor.
A0100 Mains phase failure, check mains fuses and supply cable.
A0400 Limit frequency reached; output frequency is limited.
A4000 DC link voltage has reached the Type-specific minimum.
Current Error 259 and
shown error code.
The error message can be acknowledged via the control unit buttons and digital input STO.
Key
00 No fault has occurred.
F00
Frequency inverter overloaded (60 s), check load behavior
F01 02
03 Short-term overload (1 s), check motor and application parameters
F02 00 Heat sink temperature too high, check cooling system and fan.
Temperature sensor defective or ambient temperature too low.
01
02/15

Status indication

Description
no supply voltage
initialization and self-test
ready, no output signal
operating message
Operational message, current
Ready for operation, current
259 of frequency inverter
Current Error
259, acknowledge fault
Current Error
269 can be composed of several messages. Key
Warnings
Warning messages
Meaning
310 facilitates troubleshooting and error diagnosis with the
Last Error
Error messages
Meaning
Overload
Heat sink
Quick Start Guide ACU
Rotary field on motor
no
no
no
yes
269 yes
Warning
269 no
Warning
no
no
GB
69