1 .00
Purpose and use
1 .01
Manufacturer
V. Guldmann A/S
Graham Bells Vej 21-23A
DK-8200 Arhus N
Tel. + 45 8741 3100
Fax + 45 8741 3131
www.guldmann.com
1 .02
Purpose
The Horizontal lifter BS is a lifting device which is used together with a
Guldmann Ceiling hoist and rail system to move a deceased person in a
horizontal position. The Horizontal lifter BS may be used only for horizontal
relocation
A level surface can be, e.g. a bed, a stretcher, a casket or the floor.
Conditions for use
The use of the Horizontal lifter BS is subject to the following:
•
The Horizontal lifter BS is used by trained personnel.
•
The user pays attention to secure safe transfer with the Horizontal lifter BS.
•
The Horizontal lifter BS may be used only with a hoist and rail systems which
have been tested and approved according to Guldmann's instructions.
) A horizontal relocation is defined as a relocation of a deceased person lying
x
on a horizontal surface where the horizontal position is kept during a vertical,
horizontal or combined movement. The surface can be completely level or at
an angle suited to the respective situation.
1 .03
Important/warnings
Always exercise caution when using the Horizontal lifter BS. This means that
the user should always make sure that he/she and any other persons are
safe in order to avoid injuries or accidents.
•
Please read the user manual before starting to use the Horizontal lifter BS.
•
Do not exceed the recommended safe working load of the Horizontal lifter
BS.
•
Products marked with the lowest lifting capacity determine the maximum load
of the whole system.
•
Use the Horizontal lifter BS only to move a deceased person in a horizontal
position.
•
If a defect appears during the use of the Horizontal lifter BS, stop using it and
contact the Guldmann Service Team for repair.
•
To avoid unintentional movements of the Horizontal lifter BS, the user must
position the hoist and the Horizontal lifter BS centrally over the deceased
person before lifting is started.
) of a deceased person lying on a level, horizontal surface.
x
9