Linking The Serial / Device Id To The System; Remote Control; Active Tag; Rfid Card - Nice ANATEL Guarita IP Instrucciones Y Advertencias Para La Instalación Y El Uso

10.2 LINKING THE SERIAL / DEVICE ID TO THE SYSTEM

10.2.1 REMOTE CONTROL

With the Guarita IP already in the screen of control
registration or fast registration, press the control B1+B2
buttons simultaneously twice within 3 seconds or until
appear the message Grava (Enroll) on the Guarita IP and
the fields to fill the user data. Follow the register as
described in the item 10.2.7.

10.2.2 ACTIVE TAG

With the Guarita IP already in the screen of active Tag registration or fast
registration, turn the active Tag on and turn the active Tag off twice within 3
seconds, or until appear the message Grava (Enroll) on the Guarita IP and
the fields to fill the user data. Follow the register as described in the item
10.2.7.

10.2.3 RFID CARD

If there is a (Linear-HCS) Wiegand reader or a RS485 reader installed on the Guarita IP, in
the card registration or fast registration screen, swipe the card twice over the reader and the
serial number of the card will be read by Guarita IP.
If not, the code printed on the card, according the image 10.2.3.a, can be typed before the
letter "W:" in Wiegand format with 8 digits through a USB keyboard, selecting the "P01 –
Grava (Enroll) / Cartão (Card)" option according the example in the image 10.2.3.b. If the
serial number is obtained through a device report, or through a reader, type it in the
Hexadecimal format with 6 digits before the letter "S:" according the image 10.2.3.c. After
insert the serial, follow the register as described in the 10.2.7.
Image 10.2.3.a
Image 10.2.3.b
Image 10.2.1.a
Image 10.2.2.a
Image 10.2.3.c
English - 118
Português -
118