A02 - Edita Labels (Labels Edition) - Nice ANATEL Guarita IP Instrucciones Y Advertencias Para La Instalación Y El Uso

11.2 A02 - EDITA LABELS (LABELS EDITION)

The "Labels" are the attributed labels to the lines 1 and 2 of the Guarita
IP initial screen, Blocos - Tower, Receptores - Receiver and its
respective relay output. The descriptions can be changed through the
"A02 – Edita Labels (Labels edition)" option in accordance with the
next instructions.
To edit, select the "A02 - Edita Labels (Labels edition)" option, image
11.2.a. Note that there will be many selection fields as "Linhas 1 e 2 -
Line 1 and 2", "Blocos de A à Z - Tower from A to Z" and every type
of receivers that the Guarita IP supports with CAN addressing from 1
to 8. Select the desired label, press ENTER, change the label, and
then press ENTER again to save the programming.
LINHAS 1 E 2 – LINES 1 AND 2
In the "Linhas 1 e 2 – Line 1 and 2" option, image 11.2.b, the displayed messages can be
changed in the normal mode, in the initial screen, image 11.2.c. The condominium's name,
telephone, maintenance company, for example, can be displayed. (maximum 20 characters per
line), image 11.2.d.
BLOCOS A, B, C, D ... Z - TOWER A, B, C, D ...Z
The labels of "Blocos - Tower" can be renamed in cases where, for example, there is a specific
name for every tower. Also, in cases of vertical condominiums (houses), the street's name,
where the house is located, can be assign to each tower.
EXAMPLE:
- A condominiums called "Morada dos Pássaros - Birds' Habitation", where each tower has a
name of a bird.
RECEIVERS
The "Receptores – Receivers" labels can be renamed to identify the access and where a device
was activated. The label's edition is possible to RF Receivers (controle remoto - remote control),
TAG Ativo - Active TAG, Cartão - Card (CT, CTW, CTWB), TAG Passivo - Passive TAG, and
its respective output/relay (SA1 to SA4).
Image 11.2.b
Image 11.2.e
Image 11.2.c
Image 11.2.f
Image 11.2.a
Image 11.2.d
Português - English - 127
127