Password; Fingerprint (Only Using Receivers Ctwb Model); Passive Tag (Uhf) - Nice ANATEL Guarita IP Instrucciones Y Advertencias Para La Instalación Y El Uso

10.2.4 PASSWORD

With the USB keyboard or password keyboard connected on the Guarita IP (Verify how to connect
the password keyboard to the Guarita IP in the item 4.5), type the apartment number in the field "U:"
in the de "P01 – Grava (Enroll) / Senha (password)" password register screen, then press the
ENTER key, image 10.2.4.a, type the numeric password with at least 2 and the maximum of 6
numbers in the field "S:". Press the ENTER key, type the same password to confirm and then press
ENTER again, image 10.2.4.b. If the passwords do not match, the notice "SENHA DIFERENTE
(DIFFERENT PASSWORD)" will be displayed, image 10.2.4.c. If not, another screen will be
displayed with the fields to fill with the user data, according the instructions in the item 10.2.7.

10.2.5 FINGERPRINT (Only using receivers CTWB model)

To accomplish the fingerprint registration, make sure that the RS485 biometric reader
(Linear-HCS LN5-P/LN30-ID) is properly connected on the Guarita IP, according to the
instructions in the item 4.6. With the Guarita IP in the fingerprint registration or fast
registration screen, put the finger on the RS485 biometric reader sensor and wait the
fingerprint processing. Remove the finger from the sensor and put again to confirm, image
10.2.5.a. If the "Biometria 2 (Fingerprint 2)" option in the "A15 - BIOMETRIA (Fingerprint)"
menu is configured as "SIM (Yes)" or "PANICO (Panic)" (as described in the item 11.15), the
Guarita IP will request a second finger of the resident image 10.2.5.b. Follow the previously
described procedure and then the Guarita IP will display the GRAVA (Enroll) message, with
the fields to fill the user data 10.2.7. EDITA (Edit) screen will be displayed, as described in
the item 10.3, if an already registered finger is placed twice on the RS485 biometric reader
sensor (with the user data properly linked).

10.2.6 PASSIVE TAG (UHF)

The hexadecimal serial code printed in the Tag must be
inserted by typing it through a USB keyboard, a USB barcode
reader, or read by a UHF reader connected to the Guarita IP
through the Wiegand reader connector (reference 3 of the
image 3.1.a and 3.2.a), selecting the "P01 - Grava / Tag pass.
(Enroll / Passive Tag)" option. After the serial code is inserted,
follow the registration according the instructions described in
the item 10.2.7.
Image 10.2.4.a
Image 10.2.5.a
Image 10.2.4.b
Image 10.2.5.b
Image 10.2.4.c
Image 10.2.6.a
Português - English - 119
119