A03 - Teclas Prog (Setting Keys) - Nice ANATEL Guarita IP Instrucciones Y Advertencias Para La Instalación Y El Uso

EXAMPLE:
- A TX-4 receiver in the condominiums, called by GARAGEM - GARAGE. The output SA1
to SA4 (relay output) corresponds to the remote-control buttons, respectively. In the garage
access there are two gates, where the first gate will be used to entrance and the other to
exit, and the remote control's button 1 will be used to activate the ENTRANCE gate, the
button 2 to activate the EXIT and the button 3 to PANIC, considering that the PANIC button
must open the ENTRANCE gate. Setting in accordance as previously described:
Factory Standard Setting
Display during operation by
pressing control button 1
The messages, image 11.2.i / image 11.2.j / image 11.2.k, will be
time, as well as the PC's screen with a dedicated software (if connected to the Guarita IP).

11.3 A03 - TECLAS PROG (SETTING KEYS)

The "A03 - Teclas Prog. (Programming Keys)" option defines, if
desired, functions to the six keys in normal operation.
To change the function of each key, select the "A03 – Teclas Prog.
(Programming Keys)" option, image 11.3.a, press ENTER to
access the setting screen, image 11.3.b. T1, T2, T3, T4, T5 and
T6, relate to the Guarita IP keys (T7 and T8, not used). S1, S2, S3
and S4 relate to the relay output of the receiver that will be
activated (consult the receiver manual). RF (controle remoto –
remote control), CT (cartão – card/biometria – fingerprint/senha -
password), TA (tag ativo – active tag) or TP (tag passivo – passive
tag) relate to the receiver model that the Guarita IP key should
activate. The numbers 1,2,3,4,5,6,7 and 8 relate to the CAN
address set to the destination receiver (consult the receiver
manual).
Select the desired key, press ENTER, change the key function and press ENTER again to
save the setting. Each Guarita IP panel key will activate the selected Receiver in operation
Image 11.2.g
Display during operation by
pressing control button 2
Image 11.2.i
Customized
Image 11.2.h
Display during operation by
pressing control button 3
Image 11.2.j
displayed in the Guarita IP in real
Image 11.2.k
Image 11.3.a
Image 11.3.b
Português - English - 128
128