Screens And Operation; Home Screen - Hog Slat GROW-DISC HSCD200 Manual De Instalación Y Operación

GROW-DISK™ Feed System

8. SCREENS AND OPERATION:

1. HOME SCREEN – STATUS DISPLAY
1
10
1. LANGUAGE: Press to toggle language – Available on "HOME" screen.
2. SYSTEM DATE/TIME
3. MODE: Indicates current mode system is operating. Manual, Continuous or Timed Feeding.
4. STATUS: Indicates current status as controller steps through feeding schedule. Indicates what is
happening at that present moment as well as when next feed cycle is to occur.
5. CHAIN DISK: Amp reading of Chain Disk Motor.
6. FEED SENSOR: Status of feed sensor whether "DETECTING FEED" or "NO FEED".
7. AUGER: Status of AUGER motor.
8. FEED DUMP: Current status and next dump cycle is displayed.
9. LAST RUN-TIME: Total run time of last cycle.
10. MENU Button: Press to access MENU screen.
11. FEED NOW Button: During TIMED FEEDING ONLY. Use this to begin feed cycle immediately. Once
cycle is complete, controller will automatically advance to next programmed feed cycle.
Hog Slat Inc. Newton Grove, NC USA March 2019 REV A5
11
2
3
4
5
6
7
8
9
12