Hog Slat GROW-DISC HSCD200 Manual De Instalación Y Operación página 8

GROW-DISK™ Feed System
CONNECTIONS: All connected
wire shall be
"COPPER CONDUCTORS
ONLY"
Mains Supply (L1/L2 Power In)
and Chain Disk motor – 12 to 4
AWG wire size. Recommended
tightening torque 40 in-lbf
Circuit breaker – 20A max.
Auger Motor shall be on separate
breaker.
Circuit breaker – 15 A max.
14 to12 AWG wire size.
The Toggle Switch does NOT cut the power to the chain disk controller or Chain disk controller or
the drive system. Disconnect power before servicing.
Hog Slat Inc. Newton Grove, NC USA March 2019 REV A5
8